📦 AMBIENT Contents (Based on Selected Options)

• LED Strips (choose one):

  • Option A: 2× RGB/RGBW LED Light Strips

  • Option B: 4× RGB/RGBW LED Light Strips

• 1× Underglow Controller (WLED-based Wi‑Fi Controller)

• 1× Prewired Power Cable with USB A Connector

• 1× Mounting Kit

• 2× 1M Extension Cable

• 2× 2M Extension Cables

⚠️ Before You Start

• Ensure you have at least 2A USB Power from your vehicle (Cigarette USB Adapter, Battery Bank, Hardwire USB kit etc.)

• Clean all mounting areas thoroughly with degreaser.

🧰 Required Tools

• Cable Ties (for Cable Management)

• 2A Power Supply (Cigarette USB Adapter, Battery Bank, Hardwire USB kit etc.)

🛠 Step-by-Step Installation

1. Bench Test the Kit

Before installation, connect the ambient kit directly to a 5V 2A USB Port.

Verify all LED strips light up and the controller responds correctly — see App & Control Setup section to set up the application. This ensures the kit is fully functional before fitting.

2. Plan Mounting Points

Place the LED strips under the Dashboard / Seats:

Ensure symmetry and clear spacing.

3. Mounting the Strips

Using the Adhesive Pads & Cable Ties:

• Stick the adhesive pads onto clean surfaces

• Use cable ties through the pad loops to fasten the LED strip securely

• Apply firm pressure for 30 seconds