🔄 How to Change Your Luminescence Controller’s Wi-Fi Credentials
Whether you're updating your network details or simply want a more personalised setup, follow these steps:
1. Connect to Your Luminescence Controller
Power on your Luminescence controller.
On your device (e.g., smartphone or laptop), search for available Wi-Fi networks.
Connect to the network which matches your SSID on your Pamphlet, along with the password listed.
2. Access the WLED Interface
Open the WLED Application and select your Controller
This will open the WLED control panel
3. Update Wi-Fi Settings
Click on the Config (gear icon) in the top menu.
Select Wi-Fi Setup from the dropdown.
In the Configure Access Point section, enter your new Wi-Fi SSID (network name) and Password.
Click Save & Connect at the bottom of the page.
4. Reconnect to Your Network
The controller will reboot and attempt to connect to the new Wi-Fi network.
On your device, switch back to your new SSID which you made in the previous step.
To access the WLED interface again, you can:
Open the WLED Application and select your Controller
This will open the WLED control panel
⚠️ Important Notes
Record Your New Credentials: Ensure you note down your new Wi-Fi SSID and password. If forgotten, accessing the controller may require a factory reset, which isn't covered under warranty and will come at a labour charge.
